- Home
- SAFETY RELIEF VALVE 3/8"MPT 1000-6000 PSI (5871)
SAFETY RELIEF VALVE 3/8"MPT 1000-6000 PSI (5871)
Related Products
THERMAL RELIEF VALVES by GENERAL PUMP
$16.00
The thermal relief valve keeps pressure cleaner pumps operating in a safe range to prevent overheating (caused by recirculating water). At water temperatures above 145º F, packing seals may fail. The pump then overheats. When the system is in bypass mode, the thermal relief valve opens to release hot water. Cold water can then enter the pump s...
THERMAL RELIEF VALVES
THERMAL RELIEF VALVES
$8.42
Protects the pump from damaging heat build up while it is in bypass mode. The thermal relief valve, sensing a rise in temperature opens and discharges a small amount of heated fluid. This allows cooler water to enter the system and cool the pump. When the gun is discharged the cooler water will cause the valve to close immediately. SPECIFICATION...
EASY START VALVE by PA (2394)
$21.25
The PA easy start valve eases system start up. This is especially useful with engine driven pressure washers. 1/4" hose barb outlet 3/8" MPT inlet 8.0 GPM 4500 PSI
EASY START VALVE by MTM (5621)
$26.99
The MTM Hydro easy start valve eases system start up. This is especially useful with engine driven pressure washers. 1/4" hose barb outlet 3/8" MPT inlet 7.0 GPM 4100 PSI
EASY START VALVE by GP (5998)
$18.22
The General Pump easy start valve eases system start up. This is especially useful with engine driven pressure washers. 1/4" hose barb outlet 3/8" MPT inlet 8.0 GPM 5000 PSI
SAFETY RELIEF VALVE 3/8MPT W/HB OUTLET (3301)
$24.50
Safety relief valves are an important part of your pressure wash system. These safety relief valves from General Pump are rated: 1000 - 6000 PSI adjustable 195 degrees F max 6 GPM max highly accurate over full range of pressures fits any brand pump made in the USA side or end discharge one model fits all pressure with no springs to change
SAFETY RELIEF VALVE 1/4' MPT 1000-6000 PSI (5413)
$24.05
Safety relief valves are an important part of your pressure wash system. These safety relief valves from General Pump are rated: 1000 - 6000 PSI adjustable 195 degrees F max 6 GPM max 1/4" MPT highly accurate over full range of pressures fits any brand pump made in the USA side or end discharge one model fits all pressure with no springs to cha...
SAFETY RELIEF VALVE 1/4" MPT W/HB OUTLET (2867)
$24.50
Safety relief valves are an important part of your pressure wash system. These safety relief valves from General Pump are rated: 1000 - 6000 PSI adjustable 195 degrees F max 6 GPM max highly accurate over full range of pressures fits any brand pump made in the USA side or end discharge one model fits all pressure with no springs to change
SAFETY RELIEF VALVE 1/2MPT 1000-6000 PSI (2177)
$23.00
Safety relief valves are an important part of your pressure wash system. These safety relief valves from General Pump are rated: 1000 - 6000 PSI adjustable 195 degrees F max 6 GPM max highly accurate over full range of pressures fits any brand pump made in the USA side or end discharge one model fits all pressure with no springs to change
SAFETY RELIEF VALVE 1/2" MPT W/HB OUTLET (2185)
$24.00
Safety relief valves are an important part of your pressure wash system. These safety relief valves from General Pump are rated: 1000 - 6000 PSI adjustable 195 degrees F max 6 GPM max highly accurate over full range of pressures fits any brand pump made in the USA side or end discharge one model fits all pressure with no springs to change Gene...
RV-100 PRESSURE RELIEF 1/4 MPT 650-1500 PSI (1292)
$14.60
PLEASE NOTE: THIS PRODUCT IS NO LONGER AVAILABLE. PLEASE CONSIDER ITEM 2507 AS A SUITABLE REPLACEMENT. PSI 650-1500 Inlet 1/4" MPT Gallons Per Minute 10 Temperature 150° F Maximum Adjustable relief valve The pressure relief valve is a safety device on the pressure washer. When a pre-determined pressure is reached within the system, the valve ...
PRESSURE RELIEF VALVES by GIANT PUMPS
$13.45
Protect pumps and other pressure components from over pressurization. After removing the dangerous high pressure from the system, they are able to be reset, but should be replaced as frequent use minimizes their effectiveness. They should be used whenever a pressure actuated unloader is used as these devices can eventually fail over time. Made...